Aluminium Products — 19 Categories
From 0.006 mm foil to 200 mm plate, and from a stocked 1220 × 2440 sheet to a custom extrusion die. Every category below is a live supply line — open one for the full spec range, the standards it is made to, and the checks we run before it ships.
Flat Rolled
Click any card for the full spec table
1050 / 1060 / 1100
Aluminium Sheet & Plate
Rolled flat product from 0.2 mm foil stock to 200 mm plate.
- Thickness
- 0.2 – 200 mm
- Width / size
- 600 – 2,200 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 5052 · 5083 · 5754 · 6061 · 6082 · 7075
- Standards
- ASTM B209 · EN 485 · GB/T 3880 · JIS H4000
1050 / 1060 / 1100
Aluminium Coil
Continuously cast or hot-rolled coil for roll forming and stamping.
- Thickness
- 0.2 – 8.0 mm
- Width / size
- 600 – 2,200 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 3004 · 3105 · 5052 · 5754 · 8011
- Standards
- ASTM B209 · EN 485 · GB/T 3880
1050 / 1060 / 1070
Aluminium Strip
Slit coil with controlled edge burr and camber.
- Thickness
- 0.1 – 3.0 mm
- Width / size
- 10 – 1,600 mm
- Main grades
- 1050 · 1060 · 1070 · 1100 · 3003 · 5052 · 8011
- Standards
- ASTM B209 · EN 485 · GB/T 8544
1235 / 8011 / 8079
Aluminium Foil
Household, container, pharmaceutical and capacitor foil.
- Thickness
- 0.006 – 0.2 mm
- Width / size
- 100 – 1,700 mm
- Main grades
- 1235 · 8011 · 8079 · 8021 · 1100 · 1060
- Standards
- ASTM B479 · EN 546 · GB/T 3198
1050 / 1060 / 1070
Aluminium Circle & Disc
Blanks for deep drawing into cookware and lamp shades.
- Thickness
- 0.3 – 6.0 mm
- Width / size
- Ø 100 – 1,200 mm
- Main grades
- 1050 · 1060 · 1070 · 1100 · 3003 · 5052
- Standards
- ASTM B209 · EN 485 · GB/T 3880
1050 / 1060 / 3003
Aluminium Tread / Checker Plate
Raised-pattern slip-resistant plate: five-bar, three-bar, diamond.
- Thickness
- 1.0 – 8.0 mm
- Width / size
- 600 – 2,000 mm
- Main grades
- 1050 · 1060 · 3003 · 5052 · 5754 · 6061
- Standards
- ASTM B209 · EN 1386 · GB/T 3618
Extruded & Drawn
Click any card for the full spec table
1060 / 3003 / 5052
Aluminium Tube & Pipe
Seamless extruded, cold-drawn, and welded tube.
- Thickness
- Wall 0.5 – 20 mm
- Width / size
- OD 6 – 400 mm
- Main grades
- 1060 · 3003 · 5052 · 5083 · 6061 · 6063 · 6082
- Standards
- ASTM B210 · ASTM B241 · EN 754 · GB/T 6893
1060 / 2011 / 2024
Aluminium Bar & Rod
Round, square, hexagonal and flat bar; rolled or extruded.
- Width / size
- Ø 5 – 400 mm
- Main grades
- 1060 · 2011 · 2024 · 3003 · 5052 · 6061 · 6063 · 6082 · 7075
- Standards
- ASTM B211 · ASTM B221 · EN 754 · GB/T 3191
1050 / 1060 / 1100
Aluminium Wire
Drawn wire for welding, cable conductor and mesh.
- Width / size
- Ø 0.5 – 12 mm
- Main grades
- 1050 · 1060 · 1100 · 4043 · 5356 · 6061
- Standards
- AWS A5.10 · ASTM B211 · GB/T 3195
6063 / 6061 / 6005
Aluminium Extrusion Profile
Custom die extrusions — the section is drawn, not bought.
- Thickness
- Wall 0.8 – 20 mm
- Width / size
- Circumscribed Ø up to 400 mm
- Main grades
- 6063 · 6061 · 6005 · 6060 · 6082 · 6463
- Standards
- EN 755 · EN 12020 · ASTM B221 · GB/T 5237
Finished
Click any card for the full spec table
1050 / 1060 / 1100
Colour Coated Aluminium
Coil or sheet pre-painted with PVDF, PE or epoxy.
- Thickness
- 0.2 – 4.0 mm
- Width / size
- 600 – 1,800 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 3004 · 3105 · 5052
- Standards
- AAMA 2605 · EN 1396 · GB/T 23443
Skin: 1100 / 3003 / 5005
Aluminium Composite Panel
Two aluminium skins bonded to a mineral or PE core.
- Thickness
- Panel 3 / 4 / 5 / 6 mm
- Width / size
- 1,000 – 1,575 mm
- Main grades
- Skin: 1100 · 3003 · 5005
- Standards
- ASTM E84 · EN 13501-1 · GB/T 17748
1050 / 1060 / 1100
Embossed Aluminium
Stucco, orange-peel and diamond embossed coil and sheet.
- Thickness
- 0.2 – 3.0 mm
- Width / size
- 600 – 1,600 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 5052
- Standards
- ASTM B209 · EN 485
1050 / 1060 / 1100
Anodised Aluminium
Electrochemical oxide layer — colour is in the metal, not on it.
- Thickness
- 0.3 – 8.0 mm
- Width / size
- 600 – 1,600 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 5005 · 6063
- Standards
- ISO 7599 · AAMA 611 · GB/T 5237.2
1050 / 1060 / 3003
Corrugated Aluminium Sheet
Roll-formed roofing and cladding profiles.
- Thickness
- 0.3 – 1.2 mm
- Width / size
- Cover width 750 – 1,000 mm
- Main grades
- 1050 · 1060 · 3003 · 3004 · 3105 · 5052
- Standards
- ASTM B209 · EN 485 · GB/T 3880
1050 / 1060 / 1070
Mirror Finish Aluminium Sheet
Polished to a specular reflectance above 85%.
- Thickness
- 0.2 – 3.0 mm
- Width / size
- 600 – 1,300 mm
- Main grades
- 1050 · 1060 · 1070 · 1085 · 1100 · 5005
- Standards
- ASTM B209 · EN 485 · GB/T 3880
1050 / 1060 / 1100
Perforated Aluminium Sheet
Punched round, slot or decorative hole patterns.
- Thickness
- 0.3 – 5.0 mm
- Width / size
- 600 – 1,500 mm
- Main grades
- 1050 · 1060 · 1100 · 3003 · 5052
- Standards
- ASTM B209 · EN 485
Cast & Forged
Click any card for the full spec table
A356 / A380 / ADC12
Aluminium Casting
Die casting, sand casting and low-pressure casting to drawing.
- Width / size
- Per drawing
- Main grades
- A356 · A380 · ADC12 · ZL101 · ZL102 · ZL104
- Standards
- ASTM B26 · ASTM B85 · GB/T 9438
2014 / 2024 / 5083
Aluminium Forged Ring
Seamless rolled ring for pressure boundary and rotating parts.
- Thickness
- Wall 20 – 300 mm
- Width / size
- Ø 200 – 4,000 mm
- Main grades
- 2014 · 2024 · 5083 · 6061 · 6082 · 7075 · 2219
- Standards
- ASTM B247 · AMS 4127 · GB/T 8545
How to specify
Four Things to Send With Your Enquiry
1Alloy and temper
"5052-H32" not "aluminium sheet". If you are unsure, tell us the end use and we will propose one.
2Dimensions
Thickness × width × length, or coil ID and weight. State the tolerance you need, not just the number.
3Quantity and destination
Tonnage or piece count, plus discharge port. This decides whether we quote stock, mill production or consolidation.
4Certificate requirement
EN 10204 3.1 is our default. If your project needs a classification society or an aerospace report, say it now — it changes the mill.