Application
Aluminium for Marine & Shipbuilding
Mg-alloyed plate resists seawater and welds without losing strength. This is the series classification societies expect to see on hull plate.
Specification
What Marine & Shipbuilding Specifies
| Grades normally used | 5083 · 5086 · 5754 |
|---|---|
| Product forms | Plate · Sheet · Extrusion |
| Standards & approvals | ASTM B928 · EN 485 · DNV / LR / ABS approval available on request |
Mg-alloyed plate resists seawater and welds without losing strength. This is the series classification societies expect to see on hull plate.
Categories that serve it
What We Supply Into Marine & Shipbuilding
Aluminium Sheet & Plate
Rolled flat product from 0.2 mm foil stock to 200 mm plate.
Aluminium Coil
Continuously cast or hot-rolled coil for roll forming and stamping.
Aluminium Tube & Pipe
Seamless extruded, cold-drawn, and welded tube.
Aluminium Tread / Checker Plate
Raised-pattern slip-resistant plate: five-bar, three-bar, diamond.
Verification
What We Put in Writing for This Application
- EN 10204 3.1 mill test certificate per heat, with the actual mechanical test values.
- Gauge and surface inspection recorded before packing; photos of the sealed container.
- Where the market requires it, the classification society or coating test report with the issuing body named.