Flat Rolled
Aluminium Strip
Slit coil with controlled edge burr and camber.
Quote within 24 working hours · Certificate type stated on the quote
0.1 – 3.0 mm · 1050 · 1060 · 1070 · 1100 · 3003 · 505
Specification
Aluminium Strip — Full Spec Range
These are the ranges we can quote against today. Anything outside them is a mill enquiry, not a stock call — we will say which in the first reply.
| Thickness | 0.1 – 3.0 mm |
|---|---|
| Width | 10 – 1,600 mm |
| Length | Coil, slit to width |
| Alloy grades | 1050 · 1060 · 1070 · 1100 · 3003 · 5052 · 8011 |
| Tempers | O · H14 · H16 · H18 · H22 · H24 |
| Standards | ASTM B209 · EN 485 · GB/T 8544 |
| Surface finish | Mill finish · Degreased |
| Typical applications | Transformer winding · Cable shield · Lamp cap · Radiator fin |
What the mill checks
Four Numbers That Decide Whether This Ships
1Gauge at nine points
Thickness is measured across the full width, not at one spot. A coil that is on gauge at the edge and 0.04 mm light at the centre will still pass a lazy check.
2Mechanical properties per heat
Tensile, yield and elongation pulled from the actual heat, recorded on the EN 10204 3.1 certificate. Not a 2.2 statement of compliance.
3Surface under raking light
Roller marks, oil stain, scratch and edge burr are checked before packing. Coated product is checked for film build and colour delta.
4Packing for the voyage
Kraft plus PE film, steel-strapped pallet, edge protector, desiccant. Photos of the strapping and seal number sent before sailing.
Where it is used
Common End Uses for Aluminium Strip
Transport & Automotive
Weight reduction per body panel is the entire business case. Formability and weldability decide the grade.…
Building & Curtain Wall
Facade work is a coating problem first and a metal problem second. PVDF film thickness and anodising class are what the specifier …
Packaging & Foil
Pinhole count, elongation and surface cleanliness are the three numbers that decide whether a foil runs on your line.…
Also compare
Related Categories
Aluminium Sheet & Plate
Rolled flat product from 0.2 mm foil stock to 200 mm plate.
0.2 – 200 mm · 600 – 2,200 mm
Aluminium Coil
Continuously cast or hot-rolled coil for roll forming and stamping.
0.2 – 8.0 mm · 600 – 2,200 mm
Aluminium Foil
Household, container, pharmaceutical and capacitor foil.
0.006 – 0.2 mm · 100 – 1,700 mm
Quote on Aluminium Strip
Send grade, temper, thickness and quantity. You get price, lead time, MOQ and certificate type in one reply.