Application
Aluminium for Electronics & Heat Management
Heat sinks are an extrusion geometry problem: fin height, fin pitch and flatness tolerance. 6063-T5 holds fine fins that 6061 cannot.
Specification
What Electronics & Heat Management Specifies
| Grades normally used | 1050 · 6063 · 6061 |
|---|---|
| Product forms | Foil · Extrusion · Sheet |
| Standards & approvals | EN 755 · ASTM B221 · GB/T 5237.1 |
Heat sinks are an extrusion geometry problem: fin height, fin pitch and flatness tolerance. 6063-T5 holds fine fins that 6061 cannot.
Categories that serve it
What We Supply Into Electronics & Heat Management
Verification
What We Put in Writing for This Application
- EN 10204 3.1 mill test certificate per heat, with the actual mechanical test values.
- Gauge and surface inspection recorded before packing; photos of the sealed container.
- Where the market requires it, the classification society or coating test report with the issuing body named.